Welding

Wire Wizard Guide Module End Cap Kits include both ends (end cap A & B) and attachment hardware. Each end is 1/2" NPS-F threaded to fit connectors such as the WGM-A5 or A-10HM. These end caps fit the following models: WGM-1: 45° Standard Module ...

Two styles of Guide Module Extension Arms are available: Pivoting Adjustable Extension Arms pivot upward to allow easy wire changeover with drums or reels. Two adjustable arms are available – a short arm that extends 10" (254 mm) to 18" (457 mm), and...

Two styles of Guide Module Extension Arms are available: Pivoting Adjustable Extension Arms pivot upward to allow easy wire changeover with drums or reels. Two adjustable arms are available – a short arm that extends 10" (254 mm) to 18" (457 mm), and...

Direct pull inlet guide fitting (for feeding wire directly into Module) for the following models of Wire Wizard Guide Modules: WGM-1 WGM-1-S WGM-M-1 WGM-LW-1 Includes ceramic inlet to eliminate wire shaving. Compatible with ferrous or non-ferrous...

The Wire Wizard Guide Module Drum Mounting Kit provides a simple and secure solution for mounting Guide Modules onto Wire Wizard drum hoods. Guide Module assemblies of 45°, 90°, 135° and 180° may be used with this kit.

Two styles of Guide Module Extension Arms are available: Pivoting Adjustable Extension Arms pivot upward to allow easy wire changeover with drums or reels. Two adjustable arms are available – a short arm that extends 10" (254 mm) to 18" (457 mm), and...

The Guide Module Tool & Diagnostic Kit Contains all the essential tools for installation & testing of the Guide Module System. The kit includes: Required wrenches/pliers Countersink Tool Stone bit for rotary tools Wire Draw Gauge Extra nuts & bolts ...

The WGM-A5 is the standard quick disconnect fitting for the WGM-1, WGM-1-S and WGM-M-1 style Guide Modules. Threads into either end cap (WGM-ECK-50) and also secures Modules to the WGM-A-10BK face mount bracket. Features an insulated connection point and...

The Turn Table Adapter Bracket securely attaches Guide Module assemblies to the Wire Wizard Mechanical Turn Table. Compatible with the following models of Guide Modules: WGM-1 WGM-1-S WGM-LW-1

This adjustable stand is designed for mounting Wire Wizard Guide Modules or the Wire Pilot Feed Assist in a position above a wood reel or drum of wire. An optional wire spool holder is also available to make this stand compatible with spools. The stand...

Face Mount Brackets are ideal for mounting Wire Wizard Guide Modules on top of the weld cell wall and other areas. Allows 360° directional adjustment of the Guide Module, which may be secured using the WGM-A5 connector or the A-10HM compression fitting...

The Wire Wizard Guide Module System utilizes a series of rollers with bearings to allow the weld wire to “coast" around bends and corners in the conduit, eliminating the points of high friction that occur in these areas. By eliminating the friction on...