Seeker Airfield Runway and Apron Tow-Behind Magnetic Sweeper - Green, 180" SAM180F/G

Keep Dangerous FOD Under Control The Seeker Airmag FOD Control Magnetic Sweeper is built for clearing metal FOD from airfields and aprons at high speeds. The Seeker Airmag FOD Control Magnetic Sweeper was developed with input from multiple international airports, therefore it has all the features needed to make cleaning up metal FOD at an airport as efficient as possible. The 12" D x 3" H x 60" W inch permanently charged alternating pole C8 ceramic magnet that powers the Seeker Airmag provides more concentrated pickup power that is unmatched in the FOD control industry. This magnet is contained in a stainless-steel housing and can pick up a 2.5" inch nail from 10.5" inches off the ground, providing exceptional pickup power in the 1"-3" inch operational range (view Gauss information here). The sweeping height can be easily adjusted and set within this range to the lowest possible that still allows all obstacle clearance on site. Each unit of the Seeker Airmag FOD Control Magnetic Sweeper has (12" x 60")720 square inches of magnetic surface area that gives metal debris more space to collect on the magnet. This allows for more metal to be collected before the magnet needs to be cleaned off. The Seeker Airmag Airfield Magnetic Sweeper can be ordered as a single unit with a 60" inch sweeping width or a triple setup that gives a full 15’ foot sweeping width. The triple setup allows for faster coverage of large areas and uses multiple link bars to keep the magnets stable while towing. The Seeker Airmag can be towed at 10-25 km/h (5-15mph) while still picking up metal debris because of the low sweeping height and powerful magnet assembly. Pickup performance of the seeker has been systematically tested and measured

View the Spec Sheet for This Item

View the Operation Manual for This Item