8" Magnetic Drill Press for Tubes and Pipes 200mm - Variable Speed, Reverse, Tapping ECO-TUBE.200S/T

Magnetic drilling machine, annular cutters max. dia 8 inch, power supply tension 110 - 120 Volt, power supply frequency 60 Hertz, rotation direction bidirectional. Extreme drilling and tapping on large pipes. Until recently, 55 mm was the upper limit in the TUBE range. Euroboor has added two heavy-duty machines for drilling larger holes in pipe work, the TUBE.100S+/T and the TUBE.200S/T, with the TUBE.200S/T as the top-end model. The Euroboor TUBE.200S/T is designed for heavy-duty drilling of holes up to 8" diameter (200 mm) and tapping up to 1 7/8" (M48) on pipes and tubes, but can also be used on flat materials. Thanks to its pivoting permanent magnet, the TUBE.200S/T mounts securely on pipes with a minimum diameter of Ø 9 7/16" (240 mm), even on material as thin as 1/8" (3.5 mm). This makes the TUBE.200S/T particularly suitable for demanding applications in metalworking. The machine is powered by a powerful 25 A (2,800 W) motor. The adjustable speed control and right/left rotation allow accurate matching of speed and torque to the cutter and material. The brushless motor provides efficient, consistent performance with lower wear, while the oil-lubricated 4-speed gearbox and advanced electronics offer overload protection and help protect the machine, tool, workpiece and operator, even under unstable power conditions. A digital display gives you detailed information about your machine while working. Meanwhile, the GYRO-TEC safety system shuts down the machine in case of sudden movement or excessive vibration, reducing the risk of damage and unplanned downtime, and improving user safety. The TUBE.200S/T is the right choice when pipe work demands maximum capacity, control, and safety. Four-speed oil lubricated gearbox. Suitable for tapping. Right/left rotation. Morse Taper 4 spindle with integrated tool cooling and lubrication. Electronic speed adjustment. Permanent magnet. Suitable for minimum pipe diameter of Ø 9 7/16" (240 mm) and minimum material thickness of 1/8" (3.5 mm)Reduced risk of damaging machine, tools and workpiece and hurting operator. Reduced risk of armature damage. Digital display for detailed information about your machine while working. Brushless motor. Power fluctuation protection

View the Spec Sheet for This Item

View the Operation Manual for This Item